Wide range of possibilities for analysis of almost every sample form (e.g. liquids, Si wafers). Different constructional designs – multi reflection or one bounce ATR units based on mechanically fixed ZnSe, Ge or diamond crystal. The highest quality ATR spectra and no gluing of crystals guaranteed. Possibility of many contact pressure mechanisms, heatable or flow through accessories etc.
Dedicated gas cells allow the measurement of gases and gaseous mixtures by transmission IR spectroscopy. Unmatched variety of cells made in distinct design and with different constructional materials, optical path lengths (from cm up to tens of meters), gas volumes, flow through and heating options etc.
Enables total hemispherical and hemispherical diffuse reflectance infrared spectroscopy of large sampling areas.
Dedicated liquid cells allow the measurement of liquid samples. Variety of cells made in distinct design and with different constructional materials, optical path lengths, volumes, flow through and heating options etc.
Tremendous range of laboratory and process fiber optic probes for MIR measurement. Many different constructional solutions to fit exactly to customer needs. ATR, transmission and reflection probes for liquids and solids. Flow through cells, pipe-mount elements and many others.
Tremendous range of laboratory and process fiber optic probes for NIR measurement. Many different constructional solutions to fit exactly to customer needs. Transflection, transmission and diffuse reflection probes for liquids and solids. Flow through cells, pipe-mount elements and many others.
Wide range of constructional designs to fit every application. Units differs in angle of incidence or principle of reflection – also DRIFT, specular reflection and external reflection are offered. Furthermore, available hybrid units allowing optional incidence angle or combination of reflection modes with each other or even with transmission.
The reflection unit can be used to study chemical reactions in the presence of electric currents.
Versatile transmission units allow the measurement of solid and liquid samples. Unmatched variety of possibilities - distinct design of holders for different sample forms (solids and liquids), heating and other options available.
Wide range of autosampling options for almost all types of samples and measurements. Automated wheel sample changer, liquid autosampler, automated high-throughput screening and many other options.
The CONFOCHECK is a dedicated FTIR system for the investigation of proteins in water. Its specific configuration facilitates a fast data acquisition (ca. 30 sec. per sample) with a high sample throughput controlled by an extremely user-friendly software interface.
The XSA is a versatile external sampling module for the TENSOR and VERTEX series FTIR spectrometers. It provides an additional large purgeable sample compartment for extended optical setups. User can work with 2 installed accessories without the need for exchange. Especially suited for large and/or heavy devices.
The GC-FT-IR accessory is intended as a coupling unit between a gas chromatograph (GC with capillary column) and a Bruker FT-IR spectrometer. It consists of a heatable lightpipe of small volume, a temperature controller and the optical adaptation with a high sensitivity Hg-Cd-Te (MCT) detector. Almost all popular gas chromatographs can be used with this interface.
The Helios is a user-installable high-performance ATR microscope, capable of collecting internal reflection spectra from an analysis area with a diameter of 500 µm. The Helios may also be used to perform diffuse/specular reflection analyses with a sample analysis area of approximately 1mm. The system is mounted in the sample compartment of the Bruker FTIR spectrometer on a QuickLock baseplate. The Helios incorporates a high-quality xyz stage for accurate sample positioning.
The FT-IR High Throughput Screening Extension is an external accessory, that allows automated measurements of samples in transmission and/or diffuse reflection mode using standard microplate 96 and 384 formats.
Hyperion 3000 is a FTIR microscope module with the highest sensitivity at the highest spatial resolution.
VerTera is unique extension for peak VERTEX 80v spectrometers, which broadens spectral range of spectrometer system down to 3 cm-1 together with the highest resolution and without need of cryogenically cooled components.
The IMAC is a purgable external sample cabinet designed for the imaging spectroscopy using modern focal plane array (FPA) detection technology. Using this module large sample areas (up to 5.1 x 5.1mm) can be analyzed simultaneously at a high spatial resolution (40µm), while the acquisition time is usually several seconds. The IMAC is equipped with the QuickLock base plate to use accessories and CCD camera.
Versatile and powerful external module for photoluminescence spectroscopy. The PL II module is either available with visible (532 nm) or near infrared (1064 nm) internal excitation laser. Furthermore, an optional external laser input port allows the usage of other lasers. A cryostat for low temperature photoluminescence and automated mapping stages can be adapted.
Polarization modulation (PM) provides advantages for a variety of different techniques such as PM-IRRAS, VLD (Vibrational Linear Dichroism) and VCD (Vibrational Circular Dichroism). The applied double modulation techniques overcome residual atmospheric absorptions that tend to mask desired spectral information even in purged systems. In combination with Bruker’s real dual channel acquisition technique (DigiTectTM) external signal disturbances are prevented and highest signal-to-noise ratio is guaranteed.
The Polymer Stretcher provides the combination of spectroscopic measurements with rheological perturbation. The time dependence of spectral changes in polymer samples during modulated strain can be measured easily and conveniently.
The RAM II is an add-on FT Raman module that can be coupled to Bruker Optics’ VERTEX Series multi-range FTIR spectrometers. It has a large sample compartment to utilize an extensive range of pre-aligned sampling accessories that are designed to accommodate all types of sample formats; from powders to liquids in vial.
The TG-FTIR coupling designed through the joint efforts of BRUKER and NETZSCH engineers. An outstanding sensitivity for the gas analysis is provided due to low purge gas flow rates at the thermobalance, a natural, vertical gas flow around the sample, a heated furnace gas outlet, the shortest possible heated transfer line, and a beam-conforming stainless steel gas cell with a sensitive IR detector. This is supported by a comfortable integration between the Proteus ® software for thermal analysis and the OPUS software for the FTIR.
Units dedicated to the study of catalysis, monitoring the reaction mechanism and other in-situ / operando measurements. Units with controlled temperature and internal atmosphere above the sample.
Bruker offers a wide range of beamsplitters to provide maximum experimental flexibility and optimal results. The beamsplitters cover the Far-IR (or THz) up to the VIS/UV regions. Easy manual beamsplitter exchange is available on the TENSOR and the VERTEX series spectrometers. Beamsplitters are automatically adjusted and recognized by the system and correct experimental parameters are loaded.
Wide band solid state beamsplitter provides a continuous spectral coverage with flat response from 600 to 10cm-1 and Insensitivity to mechanical vibrations.
The full spectral range from the very far IR (or THz) through the mid and near IR up to the visible and UV spectral ranges are covered. The advanced DigiTect detector technology prevents external signal disturbances and guarantees the highest signal-to-noise ratios.
Extended range room temperature DLaTGS detector for the complete IR spectrum from above 12.000 cm-1 to ca. 20 cm-1.
PA cell is based on the product from the company Gasera and it was adapted mechanically and electrically to the QuickLockTM sample compartment mechanism and DigiTectTM detector technology. The impressive mid Infrared signal-to-noise ratio is achieved. Due to high sensitivity of the novel cantilever sensor, the PA cell can be used with dry air or dry nitrogen purge or even without purge as well.
To avoid atmospheric contamination of the samples, it is possible to connect a segment from the UHV system to our spectrometers and thus measure the sample placed directly in the UHV chambers.
The emission adapter allows to perform measurements on solid samples at different temperature ranges from room temperature up to 400°C. It can be used to determine the temperature dependent emittance behavior of e.g. surfaces, coatings or any solid material.
The unique cabinet enables the measurement of transmission and ATR spectra of liquid and paste samples in parallel and provides the possibility to combine the advantages of both spectroscopic techniques and reveals information from the sample surface and the bulk at the same time.
Unique automatic beamsplitter exchange unit BMS-c for its VERTEX 80v top-of the line bench-top vacuum FTIR spectrometer. Its outstanding functionality enables the exchange of up to four different types of beamsplitter under vacuum conditions. The beamsplitter exchange is remotely controlled by the OPUS FTIR operating software.
Software controlled cryostat.
FIR source (Hg arc), externally adapted, water-cooled, including mount, cooling unit and power supply. The unit is mounted at one of the optional emission ports and is manually started.
Externally adapted, water cooled with mount and power supply.
In connection with the external glowbar source the very excellent signal-to-noise-ratio (S/N) of the VERTEX series FT-IR spectrometers can be additionally improved (S/N up to 300%). The use of the high power glowbar source might be recommended for the following application - Far IR extension; wide band KBr beam splitter for the range up to 10.000cm-1; Photo-acoustic Spectroscopy (PAS); Integrating sphere measurements.
With the integrating sphere, heterogeneous materials can be analyzed without sample preparation in diffuse reflection. The use of easy-to-clean sample cups, beakers and Petri dishes enable an efficient sample throughput at low cost. Many different designs of rotators are available to fit the sample form.
Software controlled heatable units or cells.
Are you interested in our products, applications and events? Don't miss single thing! You are welcome to subscribe.
